Manual

11. Reassemble revolver. See "Assembling After Cleaning."
12. Again wipe external surfaces with oil moistened patch to remove
any fingerprints. (Finger moisture, if left, could start a corrosion
process). (See note on cold weather lubrication).
13. Remove any gun cleaning solution and oil from grip.
~
& CAUTION: ALWAYS UNLOAD YOUR REVOLVER FOR STORAGE
AND STORE AMMUNITION SEPARATELY. Keep and store your
revolver and ammunition securely locked in separate locations
out of reach and sight of children. (Children are naturally curious
and do not always believe the real danger of guns).
NOTE: Do not store your revolver in an air-tight container, and do
not seal or attempt to seal the barrel or chambers to exclude dust,
as the internal steel surfaces are more likely to corrode.
..
"
.
Should your revolver require adjustment, or repair, make sure it is
NOT loaded and send it to Colt's. For spare parts, seek advice from
the Dealer who should have up to date information on how best to
obtain genuine Colt parts.
An illustration and list of part names are included in the next section
@
SAFETY DEPENDS ON YOU