Manual

UNLOADING

&CAUTION: ALWAYS UNLOAD YOUR REVOLVER IMME-

DIATEL Y AFTER USE, AND PRIOR TO CLEANING AND STOR-

AGE, to minimize the risk of accidental discharge.

illCAUTION: ALWAYS EXERCISE EXTREME CARE TO KEEP

MUZZLE POINTING IN A SAFE DIRECTION, WELL CLEAR OF

YOUR BODY, PARTICULARLY WHEN UNLOADING RE-

VOL VERS THAT DO NOT HAVE EJECTOR RODS.

TO UNLOAD REVOLVERS WITH EJECTOR RODS I

1. Be sure you are familiar. with Safety Instruction in Section 3. KEEP

REVOLVER POINTING IN SAFE DIRECTION AND DO NOT TOUCH

TRIGGER.

2. Draw hammer back to Half-Cock position. (The cylinder is now free to

rotate clockwise.)

3. Open loading gate.

4. KEEPING FINGERS AWAY FROM TRIGGER, align chamber as

shown in Figure 8 and push ejector rod, (located under the barrel) back-

wards through cylinder chamber, forcing out the live round or empty

case, which should be removed from revolver. Allow ejector rod to return

forward under its spring action.

SAFETY DEPENDS ON YOU