Manual

I
To load:
I
A1. CAUTION: READ SAFETY INSTRUCTIONS (section 3)-
KEEP REVOLVER POINTING IN SAFE DIRECTION WEll
CLEAR OF YOUR BODY, AND DO NOT TOUCH THE TRIGGER.
2. Draw hammer back to Half-Cock
EJECTOR ROD (NOT ON
..
(Th
I
.
d
.
f
STOREKEEPER'S OR
position e cy In er IS now ree to
SHERIFF'S MODELS)
rotate.)
3
0
I d
.
t
b
.. .
t
CYLINDER
. pen oa Ing ga e y sWinging lOut
to the right, exposing back of cylinder
and a chamber. Check each of six
chambers to ensure they are clean and
free from accumulated oil. (Clean if
necessary; see cleaning instructions.)
4. Use only ammunition recommended
on page 4 of this instruction manual as
suitable for your revolver. Insert a
round of ammunition into chamber.
5. Press round home until it is fully
seated.
6. Rotate cylinder clockwise to expose
next empty chamber and insert a round
as in steps 4 and 5 above; repeat until
FIGURE 7.
A.
FIVE rounds are loaded.
LOADING GATE OPEN
ill CAUTION: lEAVE ONE CHAMBER EMPTY FOR SAFE
CARRYING.
-~\
LOADING
GATE (OPEN)
SAFETY DEPENDS ON YOU
@