Operators Safety & Instruction Manual

26
17274S-EN
Figure 9
ADDITIONAL STRIPPING [cont]
• If necessary for cleaning, remove the elastomeric insert from the receiver [7].
The instructions found under Field Stripping and Additional Stripping are to be performed for
the purpose of proper care and cleaning. Any further disassembly should only be performed
by a qualified gunsmith to avoid the risk of damage to the firearm or loss of parts.
NOTE
Reassembly
To reassemble the firearm, follow the steps from ADDITIONAL STRIPPING and FIELD STRIPPING in reverse
order. Perform a Function Test after assembly to ensure that the firearm is operating correctly.