Operators Safety & Instruction Manual

17274S-EN

Firing Your Diemaco MRR [cont]

• When the magazine is empty, the bolt will stay in the open or rear position. Return the fire control

selector to [S] and follow the loading or unloading procedures.

Live-Fire Troubleshooting

If, during firing, you encounter an issue with the firearm’s operation, refer to the following troubleshooting

procedures. Read through and thoroughly familiarize yourself with the action plan laid out in this section

so that you are prepared to safely handle any situations that may occur.

See TROUBLESHOOTING at the end of this manual for more troubleshooting information.

CHANGE IN SOUND OR RECOIL

This condition could indicate an incomplete propellant burn, a bullet lodged in the bore, or both:

STOP FIRING IMMEDIATELY!

IF A FIREARM IS FIRED WITH AN OBSTRUCTION IN THE BORE, IT MAY CAUSE A

BREECH EXPLOSION RESULTING IN DAMAGE TO THE FIREARM AND/OR SERIOUS

INJURY TO THE USER.

NOTE

WARNING