Manual

To assemble this magazine, insert the follower and spring through the bottom
of the magazine. Be sure that the top coil of the spring is installed towards the
front of the magazine. Compress the spring and slide the base lock under the
two tabs on the bottom of the magazine. Depress the base lock and slide the
base under the two tabs and towards the rear of the magazine. Carefully align
the protrusion on the base lock with the hole in the base until the base lock
sticks out through the hole.
\IJ
-\
PROTRUSION
ON BASE LOCK
I
HOLE IN
BASE
FIGURE 16-MAGAZINE ASSEMBLY
WITH REMOVABLE BASE
UJ
SAFETY DEPENDS ON YOU
MAGAZINE FOLLOWER
BASE
LOCK
"
BASE
@