Manual

8. (A & B) Lift recoil springs and
guide and pull them rearward out
of slide. (See Figure 10).
8. (C) Compress and remove
recoil spring assembly, then
separate outer spring from it. Lift
out recoil spring bushing; See
Figure 11.
9. (A) Turn barrel bushing
counterclockwise, push barrel
and barrel bushing forward until
bushing is clear of slide, then'
remove bushing from barrel.
9. (B) No action; proceed to step 10. (Barrel bushing was removed at step 3B).
10. (A, B & C) Push link forward and remove barrel from slide.
SAFETY DEPENDS ON YOU
6. (A, B & C) Lift out slidestop.
(See Figure 9).
7. (A, B & C) Push slide forward
off the receiver.
DISASSEMBL Y NOTCH
\
SLIDE STOP
FIGURE 9-REMOVING SLIDE STOP
@