Operator's Manual

SAFETY DEPENDS ON YOU
- 18 -
CLEANING & LUBRICATION (Cont.)
NOTE: Before use, pass a dry bore patch through the barrel and each chamber to remove as much oil as possible
before firing the revolver.
12. Close the cylinder by pushing the cylinder into the frame until the cylinder latch moves forward
into its closed position.
NOTE: If necessary, cock the hammer and a few drops of oil may be applied to the internal components.
13. Then wipe all external surfaces with a cloth lightly moistened with gun oil.
IMPORTANT: DO NOT FIELD STRIP YOUR REVOLVER. IF YOU DO SO YOU WILL VOID YOUR SERVICE
AGREEMENT. IF ADDITIONAL MAINTENANCE IS REQUIRED, MAKE SURE THAT THE REVOLVER IS NOT LOADED
AND HAVE IT EXAMINED BY A COMPETENT GUNSMITH OR RETURN IT TO COLT FOR SERVICE. FOR SPARE
PARTS, SEEK ADVICE FROM THE DEALER, WHO SHOULD HAVE INFORMATION ON HOW TO OBTAIN GENUINE
COLT PARTS, OR CONTACT COLT CUSTOMER SERVICE.