Operating Instructions

CLEANING AND MAINTENANCE
In order to keep the gun functional and to extend its service life, the Colt Government 1191 A1 S should be cleaned and
maintained at regular intervals.
fig. 10
DISASSEMBLY AND REASSEMBLY OF THE PISTOL
It is not necessary to strip the pistol any further than as is described in this
manual. Further disassembly, improper assembly, or disregard of these
instructions will lead to loss of warranty, and under no circumstances will
the manufacturer then be liable for damages to persons or property.
Engage Safety. Press the recoil spring plug until you can twist the barrel
bushing by 90° and take it out. Twist the recoil spring plug by 180° and
take it out with the recoil spring and the recoil spring plug. Disengage
safety and draw the slide all of the way to the rear, raise and then let it
glide forward. Assembly is done in reverse order.
Prior to disassembly, remove the magazine and
inspect the gun, to make sure it is unloaded.
CAUTION:
Before any maintenance, remove the magazine, open the slide, and inspect the chamber to make
sure it is empty.
CAUTION:
Disassemble the gun as instructed in this manual.; Remove fouling from breech, magazine lips, follower, and receiver
with a brush and a cloth. Clean the chamber with an oil-soaked brush and then dry it with cleaning patches. Repeat until
chamber is clean. Apply a thin coat of high quality gun oil to all metal parts. Reassemble gun and check for proper
function.
8
Colt Gov_1911_A1S.qxd 10/5/07 8:36 AM Page 8