Operators Safety & Instruction Manual

DETAILED CLEANING TECHNIQUES [cont]

LOWER RECEIVER

• Clean all areas of powder, residue and dirt with a toothbrush and pipe cleaner.

• Apply cleaner / lubricant / preservative to charging handle, trigger mechanism, selector, magazine

catch, pivot and takedown pins, detents and buttstock lever.

• Clean and lightly apply cleaner / lubricant / preservative to inside of buffer tube, buffer and buffer

spring.

COMPLETION OF CLEANING PROCEDURES

• Wipe all components clean and dry, and inspect for excessive wear, corrosion or mechanical damage.

If any are discovered, have them corrected before firing again.

• Re-assemble the firearm.

• Remove any gun cleaning solution, oil and finger prints from the outside surfaces of the firearm.

[Note: Moisture from fingers, if left, could start corrosion process

15680S-EN