Operators Safety & Instruction Manual

SIGHTS - ZEROING & AIMING [cont]

AIMING TIPS

• Relax, hold steady and keep firearm level. do not tilt the firearm sideways.

• Keep tip of front sight in centre of rear aperture sight. Focus on tip of front sight, not on target.

A. For Bull’s Eye target shooting, adopt a 6 o’clock hold on the black, and adjust the rear sight until

groups of rounds are centred on the centre of the bull’s eye.

B. For Point of Aim adopt a 6 o’clock hold on the black, and adjust the rear sight until groups of

rounds are centred on the 6 o’clock position of the black. This should make your point of aim the

same as your point of impact.

[Note: It can be difficult to see your front sight against the black of the target hence the reason we aim

at 6 o’clock.]

CARE AND CLEANING

NORMAL CONDITIONS

• Clean and lubricate with a cleaner / lubricant / preservative.

DUSTY AND SANDY CONDITIONS

• Clean the firearm more frequently, at least once a day, and keep the firearm covered when possible.

• Reduce lubrication to a minimum, especially on sliding surfaces.

[cont]

15680S-EN