Operators Safety & Instruction Manual

ASSEMBLY

To reassemble the rifle/carbine follow the steps in reverse order from Disassembly, Additional Stripping and

Field Stripping. (page 17 back to page 15)

SIGHTS - ZEROING & AIMING

Some Diemaco SA firearms come with an Integrated Front Sight. If your firearm is an IUR there is no

integrated front sight, however most front sights whether Integrated or clamp on will work similarily for

elevation.

INTEGRATED FRONT SIGHT ELEVATION: The Integrated Front

Sight has an adjustable front sight post [1]. The front sight post

is moved up or down when zeroing the firearm based on Point Of

Impact (POI). First depress the Front Sight Detent [2], and turn

the front sight post clockwise to lower sight and bring POI UP.

Turn front sight post counterclockwise to raise the sight and bring

the POI DOWN. Once the firearm is zeroed, the front sight post

should not be moved.

Rear sights are not integral to Diemaco SA firearms. As all rear /

clamp-on sights are not created equally, please refer to the

documentation that came with your rear sight for care and zeroing

procedures.

[cont]

15680S-EN