Operators Safety & Instruction Manual

FIELD STRIPPING

• CAUTION - PROVE THE FIREARM SAFE BUT DO NOT OPERATE THE TRIGGER.

• PLACE THE FIRE CONTROL SELECTOR ON “S”.

• Push the takedown pin [1] all the way to the right until it clicks and then pivot the upper receiver group

[2] upward.

• Remove the bolt carrier and bolt

[3].

• Remove the cocking handle [4].

• Remove the firing pin retaining

pin [5].

• Rotate the bolt [6] into the locked

position.

• Remove the firing pin [7].

• Rotate the cam pin [8] 1/4 turn

and remove it.

• Remove the bolt from the carrier

[9].

15680S-EN