Operators Safety & Instruction Manual

If the bolt is fully forward: [cont]

• If a round or empty casing is ejected, release the cocking handle to feed a new round. Re-aim and

continue firing.

• If no empty casing or round is ejected, release the cocking handle and attempt to continue firing. If the

firearm fails to fire, take further corrective action.

If the bolt carrier is partially forward:

• Pull the cocking handle all the way to the rear and push in the bolt catch to hold the bolt to the rear.

• Examine the receiver and chamber of the firearm.

• If a live round or empty casing is in the receiver or chamber, remove the magazine.

• Clear the obstruction.

• Replace the magazine.

• If the receiver and chamber are clear: operate the bolt catch, re-aim and continue firing.

AMMUNITION

Use 5.56mm X 45 NATO or .223 Rem in this Diemaco firearm.

DO NOT FIRE:

• Seriously corroded ammunition.

• Dented cartridges.

• Cartridges with loose bullets.

• Cartridges exposed to extreme heat (57°C) until they have cooled.

[Note - See CAUTIONS in this manual for more about ammunition.]

15680S-EN