Operators Safety & Instruction Manual

UNLOADING THE FIREARM [cont]

• Press the magazine catch and remove the magazine.

• Pull the cocking handle to the rear twice; then hold it to the rear.

• ensure that the receiver and chamber are clear by looking into the ejection port.

• Allow the bolt carrier to go forward under control.

• Place the fire control selector on “R”; squeeze the trigger and close the ejection port cover.

IMMEDIATE ACTION

• If the firearm fails to fire, or stops firing, the immediate action is: tilt the firearm to the left and check

the position of the bolt by looking in the ejection port.

CORRECTIVE ACTION

If the bolt is to the rear:

• Check to see if the magazine is empty. Change the magazine.

• Operate the bolt catch, re-aim and continue firing.

If the bolt is fully forward:

• Check the magazine to ensure that it is fully seated and locked in place.

• Pull the cocking handle all the way back and watch for the ejection of a round, or an empty casing.

[cont]

15680S-EN