Manual

Hammer down (or rest) position-with the hammer down and the
trigger forward, the tranfer bar is not interposed betwwen the
hammer and firing pin.
it CAUTION: DO NOT ATTEMPT TO LOWER THE HAMMER
DIRECTLY FROM HALF-COCK OR COCKED POSITIONS unless
you release the trigger completely before the hammer reaches
position, as soon as the Half-Cock position is cleared.
FIGURE 2-HALF-COCK POSITION-EXTERNAL
HALF-COCK (OR LOADING) POSITION-With the hammer in the
Half-Cock position the sear end of the trigger engages the Half-
Cock notch and the cylinder is free to rotate for loading, unloading,
@
SAFETY DEPENDS ON YOU