Manual

&I
RANGE CAUTIONS I
9. ALWAYS BE SURE YOUR BACKSTOP IS ADEQUATE to stop
and contain bullets before beginning target practice so that you
do not hit anything outside the range shooting area. THINK! What
will you HIT if you MISS the target?
10. ALWAYS PUT A KNOWLEDGEABLE AND RESPONSIBLE
PERSON IN CHARGE TO MAINTAIN SAFETY CONTROL WHEN A
GROUP IS FIRING ON A RANGE. Obey his commands so that
discipline is maintained to reduce the likelihood of accidents.
11. ALWAYS CARRY YOUR REVOLVER EMPTY WITH THE LOAD-
ING GATE OPEN WHILE ON A RANGE until preparing to fire. Keep
it pointing towards the backstop when loading, firing and unload-
ing, to eliminate the risk of injury, death, or damage to property.
&I
LOADING/UNLOADING CAUTIONS I
12. ALWAYS BE SURE BARREL BORE AND CYLINDER CHAM-
BERS ARE CLEAR OF OBSTRUCTIONS. Clean a fouled revolver
immediately so that it will function correctly and safely.
13. ALWAYS USE ONLY CLEAN, DRY, ORIGINAL HIGH QUALITY
COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CON-
DITION WHICH IS APPROPRIATE TO THE CALIBER OF YOUR
REVOLVER. (See page 4). Gun and ammunition manufacturers
design their products within exacting engineering safety limits.
0
SAFETY DEPENDS ON YOU