Owner's Manual

EN
7
NOTE: A slight seepage of CO
2
may occur until piercing screw is tight.
NOTE: Never try to force any CO
2
capsule into or out of place. Do not store
your airgun with a CO
2
capsule in it. If you know you will not be using your airgun
for an extended period of time, empty the CO
2
capsule and remove it from the
airgun. This is very important to remember, as it will prolong the longevity of your
airgun seals.
4. Loading and Unloading Projectiles
OPERATION
KEEP HANDS AND FACE AWAY FROM ESCAPING CO
2
GAS.
IT CAN CAUSE FROSTBITE IF ALLOWED TO COME IN CONTACT WITH SKIN. ALWAYS
MAKE SURE THE CO
2
CAPSULE IS EMPTY BEFORE ATTEMPTING TO REMOVE IT
FROM THE AIRGUN BY SLOWLY TURNING THE GAS CAPSULE PUNCTURE SCREW
COUNTER-CLOCKWISE ALL THE WAY UNTIL YOU NO LONGER HEAR THE ESCAPE
OF CO
2
GAS.
WARNING:
USE ONLY .177 CALIBER (4,5 MM) STEEL BBS. DO NOT ATTEMPT TO REUSE BBS THAT HAVE
BEEN FIRED OR ARE DEFORMED. DO NOT USE BUCK SHOT, DARTS, BALL BEARINGS, OR
OTHER FOREIGN OBJECTS BECAUSE THEY CAN CAUSE INJURY TO YOU OR SOMEONE ELSE
OR MAY DAMAGE AND/OR JAM THE AIRGUN.
CAUTION
SAFE
1. Press magazine release.
2. Pull down BB follower until it locks.
3. Load BBs and press follower to unlock.
4. Insert magazine.
1. 2.
3.
4.
c
a
p
a
c
i
t
y
ROUNDS
18