Operator's Manual

SAFETY DEPENDS ON YOU
- 7 -
DESCRIPTION
This operator’s manual describes the Colt Cobra Revolver and includes information on its features.
The Colt Cobra is a single/double action stainless steel compact revolver. Incorporates a full length, snag free,
ejector shroud and interchangeable front sight on the barrel. The revolver offers excellent accuracy, balance, and
controllability. This revolver utilizes an improved action which features a transfer bar which prevents the hammer
from striking the firing pin until the trigger is squeezed and held back.
CAUTION: Only you can control the configuration of your revolver. Make sure it always complies with federal,
state, and local firearms laws and regulations that apply to you. Check that any accessories you may attach, are
legal in your state and the state you intend to use it. If you are unsure, ask a local, licensed firearms dealer.
CHARACTERISTICS OF REVOLVER
TYPE OF REVOLVER:
Colt Cobra, six shot, single/double action revolver, caliber 38 special and 38 special +P, 2” barrel.
Matte Stainless Steel, smooth trigger, shrouded ejector rod, and ramp front sight.
AMMUNITION:
38 Special & 38 Special +P
The cartridge designation is located on the barrel of the revolver (Figure 1). This indicates the correct
ammunition that must be used in the revolver.
WARNING: NEVER USE AMMUNITION NOT SPECIFICALLY DESIGNATED FOR USE IN YOUR REVOLVER.
FAILURE TO USE THE CORRECT TYPE OR CALIBER OF AMMUNITION MAY CAUSE THE REVOLVER JAM, OR TO
FAIL TO FIRE, OR GENERATE EXCESSIVE PRESSURE, WHICH CAN DAMAGE OR EVEN RUPTURE THE
REVOLVER, CAUSING PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE. To protect you from danger and
your revolver from damage, Colt does not recommend the use of reloads or remanufactured ammunition.