Operator's Manual

SAFETY DEPENDS ON YOU
- 27 -
AIMING AND FIRING (Cont.)
4. There are two ways to fire your revolver:
a. Double Action Mode and DAO (Models) - After aligning the target and sights, squeeze the
trigger fully rearward until it cocks and releases the hammer to fire the revolver. To fire the
second and subsequent rounds, release the trigger fully and squeeze it again to cock and
release the hammer. Repeat until you have completed firing, then remove finger from inside
the trigger guard.
IMPORTANT: Trigger must be fully returned forward before squeezing it again. Failure to do so can
prevent the action from fully cycling and will prevent you from being able to fire the next shot.
Figure 12
WARNING: NEVER TRY TO COCK THE HAMMER ON THE DAO MODEL, THE HAMMER WITHOUT THE SPUR
COULD SLIP OUT OF YOUR GRASP AND CAUSE THE REVOLVER TO DISCHARGE IF THE TRIGGER IS PULLED.