Manual

22
MOUNTING ACCESORIES / CLEANING / STORAGE
14 Storage
Always keep and store your firearm in an unloaded condition with the safety in the “SAFE” position. Keep
the firearm and ammunition away from children and unauthorized persons. Firearms should be stored
separately from ammunition. Always store your firearm with the empty chamber indicator (blue tab) in
the chamber to make sure no cartridge is loaded (fig. 23).
!
WARNING:
Never leave a loaded firearm unattended!
fig. 23
- Apply 2 drops of gun oil to the main spring.
- Apply 1 drop of gun oil to the extractor.
- Apply 1 drop of gun oil to each end of firing pin assembly.
- Reassemble rifle by installing the rear pin.
- Hand-tighten the compensator and the further tighten 1/4 turn using the supplied wrench.
- Wipe down exterior surface of rifle with gun oil.
- Insert the blue tap (empty chamber indicator), pull the charging handle rearward, then release to close the bolt assembly.
Note: Do not apply more oil to the recoil spring, extractor or firing pin assembly than is mentioned above. Doing so will result in an
increased accumulation of powder residue which can lead to misfires and jamming issues.