Manual

13
INSPECTION
!
WARNING:
Make sure that the firearm is unloaded (chamber cleared, barrel clear of any obstructions, magazine
empty) for inspection and that the safety is in the safe position and the muzzle is pointed in a safe direction.
!
WARNING:
Never put your hand in front of the muzzle.
2 Inspection
Functional Inspection:
1. Bolt movement: Remove the magazine and retract the bolt by pulling back the charging handle. Release the charging handle
to return the bolt fully forward into battery.
NOTE: The dust cover does not function. A working dust cover is not required since the bolt covers the chamber when in the
forward position.
2. Bolt catch: Insert the empty magazine, retract the bolt by pulling back the charging handle. The bolt locks back
in rearmost position.
3. Decocking: Make sure that the firearm is ON SAFE and unloaded (magazine removed, chamber cleared, empty chamber
indicator (blue tab) is installed, and barrel clear of any obstructions)!
Pull charging handle rearward and then release allowing it to freely move forward. Place safety in the OFF (Fire) position, make
sure the muzzle is pointed is a safe direction. Pull the trigger. The hammer drops to a de-cocked position.