Owner's Manual

B. Unloading the Pellets
Put air pistol "On Safe" (See Step 2A). Point the air pistol in a SAFE DIRECTION.
Open the slide by pushing the release lever downward (see Fig. 5A).
Remove the pellet clip. Using a ramrod, gently push each pellet out of the pellet chamber.
IMPORTANT: Never use sharp metal tools to remove pellets.
Replace the empty pellet clip with the ratchet teeth facing rearward. (See Fig. 5C).
Grip the slide from the top and move it rearward to the closed position.
IMPORTANT: Never put any part of your hand over the muzzle; grip only the top and sides of the
slide.
Check to make sure the barrel is completely unloaded. Point the muzzle in a SAFE DIRECTION, take
"Off Safe," (see Step 2B) cock the hammer and squeeze the trigger to fire.
You may also unload your air pistol by following the directions listed under Step 6 - Removing a Jammed
Pellet.
Fig. 5 A
Fig. 5 B
Fig. 5 C
Fig. 5 D
head
skirt
right
wrong
wrong