Operating instructions

4.7. Starting continuous operation

When you have carried through all basic settings, you can start with continuous

operation.

For initial operation: set back the control data (Re-Setting

and unblock the control system.

Make sure that hoppers which are not in use are separated

from the dehumidified air supply.

Make sure that the set drying temperatures are suited for the

materials in the hoppers.

After first filling, do not process the material until after the

dwelling time.

If a return air cooler is installed, switch on the coolant circuit

of the return air cooler.

Make sure that the cooling appliance is connected to the

mains socket (if present, optional).

Check setting of the timer.

Select ”Main menu”.

Acknowledge with the ENTER-key.

Press the ”F2” -key.

Select ” Dryer on ”.

Acknowledge with the ENTER-key.

Dehumidified air dryer

Start-up 4-27