Operating instructions

Granules X
desired: _ % = _ °C
(X = number of the drying hopper)
Enter the material temperature at which the flap (optional) on the drying hopper X
should close.
&
This value is entered in percent of the temperature on the
hopper inlet.
The material temperature calculated by the control system
for closing the flap on the drying hopper X is displayed in °C.
Confirm with the ENTER key.
Granules X
actual: _ °C
(X = number of the drying hopper)
The current material temperature in the drying hopper X is displayed in °C
(optional, if there is a flap).
Dehumidified air dryer
Start-up 4-14