Operating instructions

4.5.2. Entering dryer values
Select ”Dryer” .
Acknowledge with the ENTER-key.
or
Press the ”F3” -key.
Drying Heater Target (optional)
Enter the drying temperature of the dryer.
F
Observe max. drying temperature of the dryer.
The drying temperature of the dryer must be selected so that
it is the same as or higher than the desired hopper
temperature.
Turn off the dryer heating system if a lower drying heat is
entered.
Acknowledge with the ENTER-key.
Drying Heater Act. (optional)
The current drying temperature will be displayed.
Regeneration Heater Act.
The regenerated heat temperature will be displayed.
Used air Act.
The current temperature of the used air will be displayed.
Dehumidified air dryer
Start-up 4-10