Operating instructions

4.3. Initial operation
&
Before initial operation, all control data should be set back.
»
This work may be carried through only by qualified personnel
trained in the field of electrical engineering.
4.3.1. Setting back the control data (Re-Setting)
Open the control box by means of the control box key which is part of the supply.
Set the function selector (10) at ”STOP” position.
Open the battery compartment (1) of the control system and take out the battery.
Set the on/off switch (4) at position ”0".
Wait for approx. 30 seconds.
Dehumidified air dryer
Start-up 4-6
Control