Operating instructions

2.5. Electrical connection
»
Observe the rules of the local electricity board.
Check that the supply voltage and the power frequency are in
accordance with the data on the name plate of the device.
The electrical connection may only be carried through or
assigned by Colortronic service staff or by qualified staff
authorized by Colortronic.
Other persons are not permitted to carry through the electrical
connection.
L
Observe that the control system is still under voltage even
when the mains switch is switched off.
F
Regularly make sure that none of the electrical or screw
connections are loose.
Immediately after connection, check the direction of rotation
of the blowers (see rotational direction arrow on the
blowers).
The direction of rotation should be switched in the supply line
only.
The operation voltage is 400 V/3AC/PEN/50 Hz.
Special operation voltages are possible.
Dehumidified air dryer
Assembly instructions 2-7