Operating instructions

5. Maintenance

This chapter is intended for persons with skills in electrical and

mechanical areas due to their training, experience and received

instructions.

Personnel using the instructions in this chapter must be in-

structed of the regulations for the prevention of accidents, the

operating conditions and safety regulations and their implemen-

tation.

Ensure in each case that the personnel are informed.

For maintenance work taking place at theights of over approx. 6

feet, use only ladders or similar equipment and working plat-

forms intended for this purpose. At greater heights, the proper

equipment for protection against falling must be worn.

Use only suitable lifting gear which is in proper working order

and load suspension devices with sufficient carrying capacity.

Do not stand or work under suspended loads!

Ensure that the electric motors/switch cabinets are sufficiently

protected against moisture.

Use suitable workshop equipment.

Before starting maintenance work, appoint a supervisor.

Inform the responsible personnel before maintenance work on

the system is started.

Never operate the equipment when partially dismantled.

Any maintenance and repair work NOT described here may only

be carried out by Colortronic service personnel or by special-

ised staff authorised by Colortronic.

64.10-0067GB10 06/00

CTT 30

Maintenance 35