Operating instructions

Optimizing the thermo regulator
Press the “EXIT” key for at least 2 seconds until
“tunE” is displayed.
&
“tunE” flashes.
The optimization can take several minutes.
If “tunE” stops flashing, the optimization is finished.
Press the “EXIT” key.
4.3. Switching the Dryer off
Set the release switch “Timer” at “0" position.
L
Wait until the blower has stopped.
The run on time of the blower is 10 minutes.
If there is a return air cooler installed, switch off its coolant circuit.
Switch off the main switch of the dryer.
&
The green signal lamp goes off.
64.10-0067GB10 06/00
CTT 30
Start up 33
EXIT