Operating instructions

4.1. Initial start-up

Check whether the inlet of the drying hopper is closed by a blind lid, or whether a

conveyor unit (optional) is installed.

If not, manufacture a suitable blind lid and install it on the inlet of the drying hopper

or install the conveyor unit (optional).

Attachments which are not supplied by Colortronic must be

manufactured according to the safety regulation European

Standard 294.

Check whether the coolant circuit of the return air cooler is turned on (if a return

air cooler is installed).

4.1.1. Switching on the dryer

Switch on the dryer at the main switch.

The green signal lamp lights up.

For operation without timer clock:

Turn the release switch “Timer” at “I” position.

For operation with timer clock (if available, optional):

Turn the release switch “Timer” at “II” position.

The blower is running.

64.10-0067GB10 06/00

CTT 30

Start up 29