Operating instructions

4. Start up
»
This chapter is addressed to the operators of the machine.
This chapter assumes general skills with drying equipment.
This chapter assumes that the functional description has been
read and understood.
It must be ensured that the operators have the required experi-
ence.
F
Check that the main switch is in position “0".
Check whether the release switch “Timer” is at ”0" position.
Check the drying hopper for cleanliness.
Check to see whether the adhesive film on the drying
hopper has be removed.
If there is a return air cooler, switch on its coolant circuit.
&
When the dryer is switched on and when the valve block is
changed, the orange signal lamp lights up briefly.
64.10-0067GB10 06/00
CTT 30
Start up 28