Operating instructions

The dryer is equipped with 2 drying cells. One drying cell is part of the in the drying
circuit, the other drying cell is being regenerated at the same time.
A portion of the dehumidified air is available for the regeneration of the damp dry-
ing cell. This air is heated up by the regeneration heater at the start of the regener-
ation. After the heating period the drying cell is cooled off with dehumidified air.
After the switch-over time is reached, the regenerated drying cell is introduced
into the drying circuit and the cycle begins again.
64.10-0067GB10 06/00
CTT 30
Functional description 23
Functional diagram
1 Drying cell
2 Regenerating heater
3 Drying hopper
4 Diaphragm
5 Return air filter
6 Blower
7 Valve
8 Drying heater
9 Suction box