Operating instructions

2.3. Installation of the exhauster fan for regeneration of exhaust air
When plastics are being dried that release harmful gases during the drying pro-
cess, care must be taken that the regeneration exhaust air is disposed of in an en-
vironmentally sound way. At the same time the throughput of the regeneration
blower must not be altered. It should be noted when assembling a disposal sys-
tem (e.g. an exhauster system) that the regeneration exhaust air is very humid.
Thus condensation may form, which must not under any circumstances return to
the dryer.
64.10-0067GB10 06/00
CTT 30
Assembly instructions 18