Operating instructions

2. Assembly instructions

These installation instructions are intended for persons with

skills in electrical and mechanical areas due to their training, ex-

perience and received instructions.

Personnel using these installation instructions must be in-

structed in the regulations for the prevention of accidents, the

operating conditions and safety regulations and their implemen-

tation.

Ensure in each case that the personnel are informed.

The installation instructions provided in the corresponding op-

erating instructions apply for all connected equipment.

Observe safety regulations with regard to lifting gear handling

All installation work must be carried out with the equipment dis-

connected from electrical power and compressed air supply.

For installation work taking place at heights of over approx. 6

feet, use only ladders or similar equipment and working plat-

forms intended for this purpose. At greater heights, the

proper equipment for protection against falling must be worn.

The installation instructions provided in the corresponding

operating instructions apply for all connected equipment.

Use suitable workshop equipment.

Install the equipment such that all parts are easily accessible;

this facilitates maintenance and repair work.

64.10-0067GB10 06/00

CTT 30

Assembly instructions 15