Operating instructions

1.2. Explanations and information
Various terms and designations are used in these operating instructions to ensure clarity. There
-
fore please note that the terms used in the text stand for the corresponding explanations listed be
-
low.
•
Equipment
”Equipment” can mean an individual unit, a machine or an installation.
•
Operating personnel
The ”operating personnel” are persons operating the equipment on their own responsibility or ac
-
cording to instructions.
•
Operator
The ”operator” of the equipment (production manager, foreman, etc.) is the person responsible for
all production sequences. The operator instructs the operating personnel of what is to be done.
•
Operating instructions
The ”operating instructions” describe the interaction of the equipment, production sequences or
methods. The operating instructions must be compiled by the operator of the equipment.
•
Equipment foreman
When several operating personnel work on one machine, the ”equipment foreman” coordinates
the sequences. The equipment foreman must be appointed by the operator.
•
Trained personnel
”Trained personnel” are persons who, due to their training, are authorized to carry out the required
work.
1.3. Legal basis
See “Manufacturer’s Certificate” resp. “Certificate of Conformity”.
1.4. Fields of applications
For the drying of thermoplastic granules and regrind before processing in order to remove all re
-
maining moisture from the granules both inside and out, independent of climate or ambient air
conditions. Due to the compact construction, the dryer can be employed next to the processing
machine.
1.5. Notes on Usage
•
Experienced operators can begin directly with the chapter on “Start-up” if the unit has been pro
-
perly installed.
•
If the unit has not been installed yet, observe the instructions in the chapter on “Assembly Instruc
-
tions” and “Transport, Assembly and Storage”.
64.10-0214GB11 07/03
CTT 40 / CTT 70
General Information 1-4