Operating instructions

8. Assembly instructions

These installation instructions are intended for persons with skills in electri

cal and mechanical areas due to their training, experience and received in

structions.

Personnel using these installation instructions must be instructed in the reg

ulations for the prevention of accidents, the operating conditions and safety

regulations and their implementation.

Ensure in each case that the personnel are informed.

The installation instructions provided in the corresponding operating instruc

tions apply for all connected equipment.

Observe safety regulations with regard to lifting gear handling.

All installation work must be carried out with the equipment disconnected

from electrical power and compressed air supply.

For installation work taking place at heights of over approx. 6 feet

(1829 mm), use only ladders or similar equipment and working platforms

intended for this purpose. At greater heights, the proper equipment for

protection against falling must be worn.

Use only suitable lifting gear which is in proper working order and load

suspension devices with sufficient carrying capacity. Do not stand or

work under suspended loads!

Use suitable workshop equipment.

Install the equipment such that all parts are easily accessible; this facili

tates maintenance and repair work.

64.10-0214GB10 04/02

CTT 40 / CTT 70

Assembly instructions 8-1