Operating instructions

6.2.1. Hopper Heater
Each drying hopper has its own hopper heater. The temperature of the dehumidified air is adjus
-
ted by means of the thermo regulator. The setting range is from +60 - +180 °C (+140 - +356 °F).
The current temperature can be read off the digital display (= actual value).
F
The thermo regulator is factory-programmed. Nevertheless, you have to
set specific values which are dependent on the processed material.
64.10-0214GB10 04/02
CTT 40 / CTT 70
Functional description 6-6
EXIT
PGM
K1 K2
K3
180
60
Thermo regulator
Process display
drying temperature
Setpoint display
drying temperature
“PGM” key,
Selecting operating level
or parameter selection
reducing setpoint value increasing setpoint value
“EXIT” key,
Aborting the input