Operating instructions

TT 25
Open the toggle-type fasteners (A) at the hopper lid
and fold the hopper lid upwards (if in use: remove be
-
fore the single conveyor).
Clean the drying hopper.
Close the hopper lid and close the toggle-type faste
-
ners (A) (if in use: re-mount the single conveyor).
F
Remove any granules remaining in the cleaning opening.
TT 60 - 100
Open the cleaning opening of
the drying hopper: Lift and turn
the handle (A) to open the lock
(if in use: remove before the
single conveyor).
Clean the drying hopper.
Close the cleaning opening of
the drying hopper: Turn the
handle (A) until the cleaning
opening is locked and then clo
-
se the handle (if in use:
re-mount the single conveyor).
F
Remove any granules remaining in the cleaning opening.
64.10-0214GB11 07/03
CTT 40 / CTT 70
Maintenance 5-8
TT 25
A
TT 60 - TT 100