Operating instructions

5.2. Cleaning or Replacing the Air Filter

Set the release switch “Timer” at position:

Wait until the blower has stopped.

The run on time of the blower is 10 minutes.

If there is a return air cooler installed, switch off its coolant circuit.

Switch off the main switch of the dryer (the signal lamp “power” goes off).

Interrupt the mains supply so that the device cannot be switched on unin-

tentionally.

Clogged filters substantially reduce the amount of circulating air and lead

to a production lag of your dryer. Clogged filters may also damage the

heating elements.

64.10-0214GB11 07/03

CTT 40 / CTT 70

Maintenance 5-4