Operating instructions

The following errors can lead to an alarm:
Blower
The pressure of the blower is too low.
Check the blower.
Vacuum sensor defective.
Regeneration heater 1
The safety temperature limiter of the regeneration heater 1 has been activated.
Check the safety temperature limiter.
Colortronic Service.
Regeneration heater 2
The safety temperature limiter of the regeneration heater 2 has been activated.
Check the safety temperature limiter.
Colortronic Service.
Hopper heater
The safety temperature limiter of the hopper heater has been activated.
Check the safety temperature limiter.
Colortronic Service.
64.10-0214GB10 04/02
CTT 40 / CTT 70
Error and error correction 4-2