Operating instructions

4. Error and error correction
»
This chapter is directed at the operators of the equipment.
This chapter assumes general skills in dealing with drying systems.
This chapter assumes that the “start-up” description has been read and un
-
derstood.
It should be ensured in each and every case that the operators have the rele
-
vant skills.
F
Faults must be eliminated before the control system can again start oper
-
ating.
&
An alarm is indicated by steady light of the signal lamp “trouble”.
When the fault has been eliminated, the signal lamp “trouble” goes off.
64.10-0214GB10 04/02
CTT 40 / CTT 70
Error and error correction 4-1