Operating instructions

3. Start up
»
This chapter is addressed to the operators of the machine.
This chapter assumes general skills with drying equipment.
This chapter assumes that the functional description has been read and un
-
derstood.
It must be ensured that the operators have the required experience.
F
Make sure that the main switch is at “0" position.
Check the drying hopper for cleanliness.
Check to see whether the adhesive film on the drying hopper has be re-
moved.
If there is a return air cooler, switch on its coolant circuit.
If there is a timer clock (optional), adjust it. Read the operating manual of
the timer clock.
Check whether the release switch “Timer” and the release switches
“Hopper” (TT1, TT2) are at ”0" position.
&
The signal lamp “trouble” may flash shortly while the valve block is
changed.
If ordered temperature can be displayed in °F !
64.10-0214GB11 07/03
CTT 40 / CTT 70
Start up 3-1