Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
9
Channel
Location: n/a
A channel is a control that is assigned a number in the Patch display. In most displays, when a number is
entered first into the Command Line, channels are automatically addressed (there is no Channel key). In
this case, the console inserts the word "Channel" into the Command Line.
You can assign the total number of channels for a particular show in the Setup display. Reducing the
number of channels in the Setup display will not change the patch assignments.
In the Patch display, you can assign dimmers to channels so that one channel may control multiple
dimmers.
(CHANNL)
Location: [S6] in TRACKSHEET
In the TRACKSHEET display, the [S6] soft key, labeled (CHANNL) toggles the Tracksheet display from
the beginning of the stage channel list to the Automated Device list. When pressed, the label of this soft
key changes to display (DEVICE).
(CHECK)
Location: [S5] in PATCH
In the PATCH display, the (CHECK) soft key is used to verify a dimmer by bringing it full on. Once
started the Up and Down Arrow keys will increment the dimmer number allowing for fast verification of
lights and individual dimmers.
& EXAMPLE: To check dimmers 1, 2 and 3 in the Patch display:
(CHECK) [1] [ENTER] dimmer 1 on full
[↓] increment to dimmer 2
[↓] increment to dimmer 3
[↑] decrement to dimmer 2
[CLEAR] to release dimmer
[CLEANUP]
Location: Data keypad