Specifications

REFERENCE MANUAL

NSI CORPORATION MC 24/48 Version 1.03

[BLIND]

Location: Right side of console face above Grand Master

The key reserved for future function.

-C-

(C/D)

Location: [S3] in PLAYBACK alternate value (A/B)

The upper portion of the PLACKBACK display shows the most recent list of cues. To the far left appears

a small "A/B", "C/D" or "A/D". This denotes the last executed cue. If you do not see the "C/D" next to a

cue, pressing the (C/D) soft key will scroll the cue display to show what cue is being displays from the C/D

playback fader. If the symbol is "A/D" it mean the SAME cue number was last played on both the A/B and

C/D playback faders. After pressing, the soft key toggles to display (A/B)

[CLEAR]

Location: Data keypad

Use the [CLEAR] hard key to clear keystrokes entered into the Command Line. The [CLEAR] key also

has the following actions:

q "Backspace" to erase keystrokes in the Command Line, prior to pressing the [ENTER] key.

q Release all captured channels from wheel control.

q Return to previous level of soft keys.

q Exit dimmer check mode.

q Dismiss an error message or warning box.

q Abort actions after receiving a warning message.