Specifications

REFERENCE MANUAL

NSI CORPORATION MC 24/48 Version 1.03

[#] [THRU] [#] [AT] [ENTER]

[TIME]

Location: Data keypad

Use the [TIME] hard key in the Stage, Preview, Cue Sheet, Tracksheet displays to create or edit the time

fade parameters of a recorded cue.

[TRACK SHEET]

Location: Display keypad, bottom row.

Use the [TRACK SHEET] hard key to show the Track Sheet display on the currently selected monitor.

The purpose of the Tracksheet display is to allow the channel levels of a number of cues or cue parts to be

compared, created and edited. The contents of cues may be edited from this display in "blind" mode only,

and may be viewed when the cue is re-executed. Changes to cues are permanent as they are made. The

soft keys available in the Tracksheet display are:

q (Q MODE) (Selects Track mode: Tracking, Cue Only, or Cleanup.)

q (SELCUE) (Selects a specific cue.)

q (RENUM) (Renumbers a cue.)

q (COPY) (Copies a cue.)

q (DELETE) (Deletes a specified cue.)

q (NAME) (Use to assign an Alpha name to a cue.)

q (Video2) (Activate the 2nd Video Display)

The display shows 24 channels horizontally across the display. You can use the Right and Left Arrow

keys to view additional channels. Cues are listed vertically, use the Up and Down Arrow keys to view

additional cues.