Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
38
Single Scene/Two Scene
Location: Setup Display menu item #21.
All models of the MC 24/48 control console except the model 600 have manual channel sliders. These
sliders are arranged in two row of 24, 48 or 72 slider each. In Single Scene mode each slider represent a
control channel. In two scene mode, the channels of the top row are duplicated on the second row and the
A/B playback fader serves as a split-fader to operate the scenes. The chart below shows the different
channel capacities of manual channel sliders.
Single Scene Two SceneMODEL Total
Faders
Top Row Second Row Top Row Second
Row
MC 24/48 48 1 - 24 25 - 48 1 - 24 1 - 24
& EXAMPLE: To switch between Single Scene and Two-Scene mode for the manual channel
sliders:
1. Press [21] [ENTER] selects single Scene/Two Scene item
2. Press [á] or [â] using the up arrow or down arrow cursor keys select
either Single or Two
3. [ENTER] press to confirm selection.
[STAGE]
Location: Display keypad, bottom row.
Use the [STAGE] hard key to activate the stage display on the currant video display.
[SUB]
Location: Data keypad
You can use the Submaster hard key to create a channel list of all channels in the specified Submaster.
This is equivalent to using a sub as a group.