Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
37
(SELSUB)
Location: [S4] in PREVIEW
When entering the PREVIEW display, or when changing modes in the PREVIEW display, use the
(SELSUB) soft key to select a Submaster to preview.
& EXAMPLE: To select a Submaster to edit in PREVIEW display:
(SELSUB) [#] [ENTER]
[SETUP]
Location: Display keypad, bottom row.
Use the [SETUP] hard key to change the current video monitor to the Setup display. The Setup display
shows all information concerning the configuration of the system for a show, and allows you to view and
edit the information. All operating parameters are displayed along with their current status. You can set
each parameter using its corresponding menu item or soft key. The top of the display shows the console
model and the software version currently installed. The Setup display indicates the number of cues and
groups available to record in the show, along with the file name and show name of the current show.
Show Name
Location: Setup display menu item #1.
Setup menu item 1 provides a way to add an alphanumeric label to a show file. The Show Name is
different than the show File Name. The Show Name only appears in the Setup display, and can only be
viewed when the show is in active memory.
& EXAMPLE: To assign a Show Name to a show in the Setup display:
1. Press [1] on the data keypad.
2. Using the Submaster bump buttons or an optional ASCI keyboard enter alphanumeric
show name or any number form the channel keypad, press [ENTER].