Specifications

REFERENCE MANUAL
NSI CORPORATION MC 24/48 Version 1.03
33
Use the [RECORD CUE] hard key to record the current "look" on stage as a cue. If the indicated cue
already exists, an Overwrite Warning message appears and requests confirmation before overwriting the
previously recorded cue. You must press the [ENTER] key a second time to confirm, or press the
[CLEAR] key to cancel the command. The Track mode may be selected any time before the [ENTER]
key is selected. In the Stage display, any edits to a live cue are not recorded unless the Record Cue function
is executed.
& EXAMPLE: The following example shows all different combinations of cue attributes available
in a Record Cue command. The order of attributes is not important, and the
commas are shown here only for clarity:
[RECORD CUE] [#], [PART] [#], [TIME] [#] [AND] [#], [DELAY] [#] [AND] [#],
[FOLLOW] [#], [PROFILE] [#] [AND] [#], [LINK] [#], [EFFECT] [#], [ENTER]
RELATED TOPICS:
[CUE]
[PREVIEW]
[STAGE]
(TRACK MODE)
[RECORD GROUP]
Location: Data keypad
You can use the [RECORD GROUP] hard key to record the current stage "look" to a specified group
number. If the indicated group already exists, an Overwrite Warning message appears and requests
confirmation before overwriting the previously recorded group. You must press the [ENTER] key a
second time to confirm, or press the [CLEAR] key to cancel the command.
& EXAMPLE: To record a group live from any display:
[RECORD GROUP] [#] [ENTER]
[RECORD SUB]
Location: Data keypad
Use the [RECORD SUB] hard key to record the current stage "look" to a specified Submaster. The
Record Submaster command takes a picture of the stage display levels and records the Submaster,
replacing the levels (if any) previously assigned to the Normal Submaster. This command changes the
mode of the indicated Submaster to Normal mode.
& EXAMPLE: To record a Submaster "live" from any display:
[RECORD SUB] [#] [ENTER]