Specifications

REFERENCE MANUAL

NSI CORPORATION MC 24/48 Version 1.03

[PROFILE] [#] [ENTER] (Assigns profile to current dimmer.)

& EXAMPLE: To delete a profile assignment in the Stage, Preview, Cuesheet or Tracksheet

displays, do not specify a profile number:

[CUE] [#] [PROFILE] [ENTER]

& EXAMPLE: To delete a profile assignment in the Patch display, do not specify a profile number:

[DIMMER] [# list] [PROFILE] [ENTER]

RELATED TOPICS:

[CUE]

[DIMMER]

[PATCH]

(PROFIL)

Location: [S4] in PATCH alternate value (LEVELS)

[S7] in SETUP

In the PATCH display the (PROFIL) soft key toggles the display from showing patch assignments with

proportional levels to showing the dimmer fade profile number associated with that patch assignment.

Profile "00" is the default profile. The user may program profiles #1 through #15 to create fade profiles for

Non-dims and other lighting sources.

-Q-

(Q MODE)

Location: [S1] in STAGE, PREVIEW, DEVICE, CUESHEET, TRACKSHEET and PLAYBACK

Use the (Q MODE) soft key in most displays to select one of the three Q Modes in which to operate the

console. Every time you press the (Q MODE) soft key it changes the current Q Mode between Tracking,

Cue Only, and Cleanup modes.

The active Q Mode determines how cue recording and edit commands affect cues. You can change the

current Q Mode anytime prior to executing a command with the [ENTER] key. The current Q Mode is

shown immediately to the left of the Command Line.

Tracking Q Mode: In Tracking Q Mode, cues are recorded so that levels that change from the

previous cue are assigned "hard" (non-tracking) values, while levels that do not change are assigned "soft"

(tracking) values. When you edit a level in the previous cue in Tracking mode, the change will "track